We are confirmed! We're disassembling, packing up and shipping the whole "Fire In The Hole" team to Atlanta, Georgia on June 9th for the 2012 Red Bull Soapbox Race. Oakley is the only representation outwith the South and we're coming en-force.
The P51 Mustang is in the chop-shop for some serious upgrades. Pilot George is getting a roll bar to protect his expensive designer noggin, some front suspension is being installed to cushion the jumps and the entire steering geometry is getting a little more aggressive.
It's a serious production to get the car and all of us over there in 4 weeks, the to-do list is growing rapidly!
You may enjoy our documentation we submitted to explain our car...
"Let it be noted that numerous treaties and 2 protocol of the Geneva Convention are being broken by sharing this information with you. 4 Military secrets are being shared, 2 Federal offenses committed and worse than all that, a bond of secrecy between Fire In The Hole and a small African goat is being broken. However, in the interests of fair play, here goes…
The Body is fabricated from mild steel tubing in various wall thicknesses and diameters (where required for strength or weight saving). The main frame rails were shaped by pie cutting, bending, sprinkiling pixie dust and welding to the desired profile shape. The tougher welds were reinforced by liberal binding with Unobtanium (Copyright Oakley. Don’t use that, we’ll sue…haha, that’s cute, you think we’re kidding).
With the frames created, cross braces were then put into place to establish the width of the body. We knew we wanted to use a 20" BMX wheel because of the ride height we wanted to achieve. We also wanted to integrate proper disc brakes (front/rear) found primarily in Mountain Bikes. Our driver, George is not only cute, but he likes being able to walk and requested some safety features. Some of us couldn’t quite understand this, but he’s Asian and they are all ninja’s, right? Nothing existed in this combination, so we had to figure out how. We had planned on re-lacing MTB hubs to a 20" BMX rim, but time was not on our side and George put the remainder of the pixie dust in his hair. While driving around Santa Ana (a locale in Orange County without the Maserati’s and big fake breasts) looking for a taco truck, we came across a homeless fellow with exactly what we were looking for. Why his recycling cart was outfitted with 20" BMX wheels, custom fabricated to hold with MTB Brakes, we will never know. Anyway, we rho-sham-bo’d him for George’s hair and luckily won.
The underside belly pan is a 1/16" thick Aluminum plate. We ran a very simple traditional Go Kart steering system with homemade spindles and a hot rod dropped front axle (cutting edge design for Nick, who’s newest car is a 1934 pickup truck). The rear is a solid axle with built in camber plates. We found a Fiber glass Go Kart seat and fab’d up a small steering wheel with a quick release hub and, of course, Oakley B-1B grips...(shameless plug! Woo!) The body was inspired by a sketch from Jae of a WW2
P-40 Tiger, morphed into an open wheeled race car. We scoured a few of the local homes in Orange County for a P-40 tiger and only found 3 Bell helicopters, 27 Lamborghini’s, 16 Gulfstream jets and 612 barrels of botox. We wanted to keep the weight down so resorted to cladding the car in sheet styrene. The airplane
Jae had drawn worked easily for sheets of styrene. A blast of paint and Cool Graphics to finish it off and we were set. Agh! Wait! A final touch from Jae was the REDBULL can exhaust manifolds - sugar free on the right bank and regular on the Left bank. You’ll notice we veer to the right, something about that damn fake sugar freeness. "